Fireplace installation – Desa (V)T32N SERIES User Manual

Page 26

Advertising
background image

www.desatech.com

111986-01D

6

6. Place log #6 (left log) onto two pins on left

side of back and front log. See Figure 48.

7. Place lava rock along sides and front of firebox

bottom in areas that are visible only. It is not

necessary to use all of lava rock provided.

NOTICE: Do not put lava rock on

burner or under burner. Placing

lava rock on burner will cause

performance problems.

8. Pull ember material apart into pieces no larger

than a dime. Place these pieces loosely and

sparingly directly onto exposed section of

front burner and along space between burner

and grate prongs (see Figure 49). This will

create glowing ember appearance as flame

touches ember material. Do not block air slots

by using too much ember material in one area.

It is not necessary to use all of ember material

provided.

FIREPLACE

INSTALLATION

Continued

1

2

Figure 44 - Installing Log No. 1

Figure 45 - Installing Log No. 2

3

Figure 46 - Installing Log No. 3

5

6

Figure 48 - Installing Logs No. 5 and No. 6

4

Figure 47 - Installing Log No. 4

Ember Material

Figure 49 - Placing Ember Material on

Burner

9. Close glass door, lock door latches, replace

screen and close louvers (see Removing/Replac-

ing Glass Door, steps 5 through 7, page 24).

WARNING: The glass door

must be securely in place before

running this fireplace. Do not run

this fireplace if glass is missing

or broken.

Advertising