ADLINK PCES-8581-13S User Manual
Page 24
10
Getting
Started
2.3 Installing PCI Peripheral Cards to an Extension
Chassis
The following instructions are for illustration purposes
when attempting to install additional PCI devices to your
extension chassis. Both RK-8005 and RK8014 extension
chassis are pre-installed with one PCI-8565 extension
card.
1. Locate your extension chassis (RK-8005 or RK-8014)
and plug-in the AC power cord but DO NOT power-on
the equipment.
2. Unscrew the four housing screws of the extension chas-
sis using a (cross-head or flat-head) screwdriver. Open
the top cover of the chassis. You should see a row of
PCI slots (four slots for RK-8005 or 13 slots for RK-8014)
along the backplane.
3. Locate your PCI device and remove it from its packag-
ing. (Please wear anti-static gloves and use an anti-
static surface when handling the card).
4. Install your PCI device in an available PCI slot and be
sure to firmly attach it’s bracket to the backplane of the
extension chassis.
5. Close the extension chassis and re-install its housing
screws.
CAUTION: