4 cabling host computer to extension chassis, Figure 2-3: cabling 3 m extension cable to host pc, Cabling host computer to extension chassis – ADLINK PCES-8581-13S User Manual
Page 26
12
Getting
Started
2.4 Cabling Host Computer to Extension Chassis
Now that you have successfully installed the PCIe-8560 into the
Host computer (or installed an additional PCI device in the exten-
sion chassis), you may connect the Host Computer and Extension
Chassis with an extension cable.
Do not remove the extension cable after the system is
powered on. It may cause system errors or data loss. If
the cable is unplugged improperly, reconnect it and
reboot the host PC and extension chassis.
1. Locate your 3 M extension cable.
2. Connect the 3 M extension cable to the PCI Express
®
serial link connector (PCIe-8560) of your host PC.
3. Firmly attach the 3 M extension cable by tightening its
retention screws.
Figure 2-3: Cabling 3 M Extension Cable to Host PC
CAUTION: