ADLINK PCES-8581-13S - Manual (Page 48)

34 Hardware Information
PCES-8581-4S PCES-8581-13S
User’s Manual
Table 3-16: BP-8014 Backplane Connectors and Jumpers
Connector/Jumper Description
JP2 ATX power enabling connector
JP6 ATX power OK status connector
JP7 LED connector
FAN4 Fan connector for +12 V fan
FAN5 Fan connector for +12 V fan
FAN6 Fan connector for +12 V fan
CN2 ATX power connector
Pin # Assignment
1 PWR-ON
2
If JP3 2-3 connected, this pin is
Ground (Default).
For PCES-8580-13S extension sys-
tem, user should not change the set-
ting of JP3.
Table 3-17: BP-8014 JP2 ATX Power Enable Connector
Pin # Assignment
1 PWR-OK
2 5 V
sb
, +5 V standby power
Table 3-18: BP-8014 JP2 ATX Power Enable Connector
JP2
1
2
2
1
JP6