ADLINK cPCI-6625 - Manual (Page 13)

Overview 1
cPCI-6625
1 Overview
1.1 Introduction
This manual provides information on the ADLINK cPCI-6625
Series blades. The cPCI-6625 is a 6U CompactPCI blade in dual
slot width (8HP) form factor compliant with the PICMG 2.30 Com-
pactPCI PlusIO standard with an ultra hard metric (UHM) J2 con-
nector. The cPCI-6626 is a 6U CompactPCI blade in dual slot
width (8HP) form factor compliant with the CompactPCI 2.0 Com-
pactPCI R3.0 standard with hard metric J2 connector. The design
of both blades is based on the 2nd Generation Intel® Core™
i7-2710QE and Core™ i3-2330E with Mobile Intel® HM65
Express Chipset. The cPCI-6625 and the cPCI-6626 are value 6U
CompactPCI blades that offer high speed data transfer rate and
reliability.
The cPCI-6625 Series supports dual-channel un-buffered
DDR3-1066/1333 memory up to a maximum capacity of 16GB.
Graphics is integrated in the processor and output is provided
through two VGA ports on the front panel.
The cPCI-6625 Series feature four PCI-Express Intel® 82583V
Gigabit Ethernet controllers. The Ethernet connections can be
accessed through two Ethernet ports on the front panel and two
routed to J2 connector. The cPCI-6625 and cPCI-6626 also offer
six RS-232 serial ports via three RJ-45 connectors (2 serial ports
per connector), and four Type-A USB 2.0 ports on the front panel.
Storage features of the cPCI-6625 and cPCI-6626 include a SATA
6 Gb/s direct connector interface with mounting space for a 2.5"
HDD/SSD, a SATA 6Gb/s 7-pin on board and four SATA 3Gb/s
ports signals routed to J2 connector.
The cPCI-6625 Series additionally reserves one PCI-Express x4
onboard for a layer 2 expansion card that can provide maximum of
four PCI-Express x1 via Molex 74960-3018 on the front panel. The
cPCI-6625 and the cPCI-6626 also provide four PCI-Express x1 to
the J2 connector.
The cPCI-6625 Series supports the 32-bit/33MHz CompactPCI
interface and operates in a system slot only.