Interfaces – ADLINK cPCI-6625 User Manual
Page 25
Functional Description
13
cPCI-6625
Interfaces
X
Two channels of DDR3 memory with a maximum of one
SO-DIMM per channel
X
Memory DDR3 data transfer rates of 1066 MT/s and 1333
MT/s
X
64-bit wide channels
X
DDR3 I/O Voltage of 1.5 V
X
1Gb, 2Gb, and 4Gb DDR3 DRAM technologies are sup-
ported for x8 and x16 devices
X
Using 4Gb device technologies, the largest memory capac-
ity possible is 16 GB, assuming dual-channel mode with two
x8, dual-ranked, un-buffered, non-ECC,
X
SO-DIMM memory configuration
X
The PCI Express port(s) are fully-compliant with the
PCI-Express Base Specification, Revision 2.0
X
5 GT/s point-to-point DMI interface to PCH is supported
X
The Processor Graphics contains a refresh of the sixth gen-
eration graphics core enabling substantial gains in perfor-
mance and lower power consumption.
X
DX10.1, DX10, DX9 support
X
OGL 3.0 support
X
FDI carries display traffic from the Processor Graphics in
the processor to the legacy display connectors in the PCH