ADLINK cPCI-6625 - Manual (Page 45)

Drivers & Utilities 33
cPCI-6625
6 Drivers & Utilities
The cPCI-6625 Series drivers can be found on the ADLINK
All-In-One DVD at X:\cPCI\cPCI-6625\ or from the ADLINK web-
site (http://www.adlinktech.com). ADLINK provides validated
drivers for Windows XP Professional and Windows 7. We recom-
mend using these drivers to ensure compatibility.
6.1 Driver Installation Procedure
The following describes the driver installation procedures for Win-
dows XP.
1. Install the Windows operating system before installing any
driver. Most standard I/O device drivers are installed during
Windows installation.
2. Install the chipset driver by extracting and running the pro-
gram in ...\Chipset\Intel_Chipset_Device_Software
_AllOS_9.2.0.1030.zip.
3. Install the Microsoft .NET Framework utilities (required for the
graphics utility) by extracting and running the program in
...\Chipset\Microsoft_Net_Framework_v3.5_SP1.zip.
4. Install the graphics driver and utilities by extracting and run-
ning the program in ...\Graphics\Intel_HD_Graphics
_Family_WinXP_6.14.10.5337.zip.
5. Install the LAN drivers by extracting and running the program
in …\LAN\Intel_82583V_Gigabit_Network_WINXP
_32_11.17.27.0.zip.
6. Install the Rapid Storage Technology Interface by
extracting and running the program in …\AHCI\Intel
_Rapid_Storage_Technology_32bit_10.1.0.1008.zip.
NOTE: NOTE:
In order to enable AHCI mode, you must pre-install the
Intel® Rapid Storage Technology driver using the F6 instal-
lation method described in the file F6Readme.txt, located
here: …\AHCI\Intel RST Driver Files_F6 Install_
32bit_11.2.0.1006.zip (not required for Windows 7).