ADLINK cPCI-6625 - Manual (Page 74)

62 BIOS Setup Utility
Graphics Configuration
Graphics Turbo IMON Current
Set the value which graphics Turbo IMON supported (14~31).
Primary Display
Allows you to select which graphics controller to use as the pri-
mary boot device. Options: Auto, IGFX, PEG, PCI.
Internal Graphics
Allows you to select enable/disable.the internal graphics.
Options: Auto, Enabled or Disabled
GTT Size
Select the GTT Size. Set this value to 1MB / 2MB.
Aperture Size
Select the Aperture Size. Set this value to 128MB / 256MB /
512MB.
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (fixed) graphics memory size
used by the internal graphics device. Configuration options is
as below screen: