ADLINK Express-IBE2 - Manual (Page 10)

Page 10 Express-IBE2
2.7. Super I/O (on carrier using LPC -bus)
• Chipset: Winbond W83627HG-AW and W83627DHG-P, without keyboard A20 line
• Parallel Port: LPT1
• Serial Ports: COM1 / COM2 (with console redirection)
2.8. GPIO
• Chipset: NXP PCA9535
• Description: 16-bit I2C-bus and SMBus, low power I/O port with interrupt
• GPO: 4 ports
• GPI: 4 ports with interrupt
2.9. Board Controller
• Type: SEMA BMC
• Functions:
• Power Features
• AT mode control
• ECO mode support (cut 5Vsb during S5) but keep power on RTC clock
• Emergency Shutdown
• Power Status Mointoring and Signalling (LED)
• Current Monitor
• Flat Panel Control
• Support for PWM control on carrier
• Backlight Enable and Vdde inhibit
• General Purpose I2C
• Dual BIOS with Failsave mode
• Watchdog Timer
• Fan Control
• TPM (Trusted Platform Module)
• Chipset: Infineon SLB9635TT1.2
• Type: TPM 1.2
2.10. Fan Control
• Control Source: Temperature Sensor
• Location
• 4-pin Mini connector on module: PWM and TACH 5V based on module
2.11. Debug
• JTAG: SFF connector for XDP to CPU
• LPC header: for mounting POST CODE assembly