ADLINK Express-IBE2 - Manual (Page 66)

Page 66 Express-IBE2
Backlight Control
Back Light Control Setting
GTT LVDS Backlight Control
GTT LVDS Backlight Control. Note: This setting will be reset by the Graphics Driver.
DDI function choose
DDI function set to Display Port or HDMI.
BIA
Auto: GMCH use VBT default. Level n: Enabled with selected aggressiveness level.
Spread Spectrum clock
Hardware: Spread is controlled by chip. Software: Spread is controlled by BIOS.
ALS Support
Valid only for ACPI. Legacy = ALS Support through the IGD INT10 function. ACPI = ALS support through an ACPI ALS driver.
Active LFP
Select the Active LFP Configuration. No LVDS: VBIOS does not enable LVDS. Int-LVDS: VBIOS enables LVDS driver by
Integrated encoder. SDVO LVDS: VBIOS enables LVDS driver by SDVO encoder. eDP Port-A: LFP Driven by Int-DisplayPort
encoder from Port-A. eDP Port-D: LFP Driven by Int-DisplayPort encoder from Port-D (through PCH).
Panel Color Depth
Select the LFP Panel Color Depth
NB PCIe Configuration
PEG0 – Gen X
Configure PEG0 B0:D1:F0 Gen1-Gen3
PEG0 ASPM
Control ASPM support for the PEG: Device1 Function 0.This has no effect if PEG is not the currently active device.