ADLINK Express-BASE - Manual (Page 24)

Express-BASE User’s Manual Page 24
CNY8: Backlight Control
6.11 VGA, LVDS
Pin Signal Pin Signal
1 Red 2 Green
3 Blue 4 NC
5 GND 6 GND
7 GND 8 GND
9 NC 10 GND
11 DDC Power 12 DDC2B Data
13 HSYNC 14 Vsync
15 DDC2B clock
CN1: VGA
Pin Signal Pin Signal
1 LVDS_I2C_DAT 2 LVDS_I2C_CK
3 N.C 4 N.C
5 GND 6 LVDS_A0-
7 LVDS_A0+ 8 LVDS_VDD_EN
9 LVDS_A1- 10 LVDS_A1+
11 LVDS_BKLT_EN 12 LVDS_A2+
13 LVDS_A2- 14 N.C
15 LVDS_A_CK- 16 LVDS_A_CK+
17 N.C 18 LVDS_A3+
19 LVDS_A3- 20 GND
21 LVDS_B0- 22 LVDS_B0+
23 GND 24 LVDS_B1-
25 LVDS_B1+ 26 GND
27 LVDS_B2- 28 LVDS_B2+
29 GND 30 LVDS_B_CK+
31 LVDS_B_CK- 32 N.C
33 LVDS_B3+ 34 LVDS_B3-
CNY5: LVDS Flat Panel Connector
Pin Signal Pin Signal
1 GND 2 Panel PWR
3 Backlight CTRL 4 GND
5 Backlight Enable 6 GND
7 NC 8 Backlight PWR
To avoid damage to the display panel, be sure to set the Panel Power Voltage (JP8) and
Backlight Power Voltage (JP7) to the correct values for your display.
See 6.12 LVDS Jumper Settings for Panel Power Voltage (JP8), Backlight Power Voltage
(JP7) and other LVDS jumper settings.
1 2