ADLINK Express-BASE - Manual (Page 36)

Express-BASE User’s Manual Page 36
NOTE: <<<< indicates default setting
JPY11: Ethernet Mode
Configure the jumper to "10/100/1000" for
modules with Gigabit Ethernet, to "10/100" for
modules with Fast Ethernet
Jumper Status
1-2 10/100/1000 <<<<
2-3 10/100
1
2
3
JPY7, JPY8: Reserved
JPA1: Super I/O
Enables/disables the Super IO. By default, the
Express-BASE enables the onboard W83627HG-
AW Super I/O. To disable the Onboard Super I/O,
short pins 2-3 of Jumper JPA1.
Jumper Status
1-2 Enable <<<<
2-3 Disable
1
2
3