ADLINK Express-BASE - Manual (Page 41)

Page 41 Express-BASE User’s Manual
8.5 ATX Power Connectors
The nanoX-BASE has one ATX 24-pin
connector to supply power to the carrier board
and one ATX 12V 4-pin connector to supply
power to the COM Express module.
The system will not power on unless
an ATX 12V 4-pin connector is
connected.
If your power supply has a 24-pin ATX
connector, then attach the connectors as
shown.
If your power supply has a 20-pin ATX
connector, then attach the connectors as
shown.
DO NOT plug the ATX 12V 4-pin
connector into the ATX 24-pin power
connector.
ATX 24-pin
Connector
ATX 12V 4-pin
Connector
ATX 20-pin
Connector
ATX 12V 4-pin
Connector