ADLINK nanoX-TCR - Manual (Page 37)

Chapter 4 BIOS Setup
nanoX-TCR Reference Manual 33
BIOS Setup Menus
This section provides illustrations of the six top-level setup screens in the nanoX-TCR BIOS Setup Utility.
Below each illustration is a bullet list of the screen’s submenus and setting selections. The setting selections
are presented in brackets after each submenu or menu item, and the optimal default settings are presented in
bold. For more detailed definitions of the BIOS settings, refer to the AMI Aptio TSE User Manual:
http://www.ami.com/support/doc/AMI_TSE_User_Manual_PUB.pdf .
Main BIOS Setup Screen
Figure 4-1. Main BIOS Setup Screen
• System and Board Info
♦ BIOS Rev. [XXX]
♦ BC Firmware Rev. [X.X.X]
Table 4-1. BIOS Setup Menus
BIOS Setup Utility Menu Item/Topic
Main Date and Time
Advanced Launch PXE OpROM, ACPI, CPU, USB, Hardware Monitor, Super IO,
Serial Port Console Redirection
Chipset North Bridge and South Bridge
Boot Boot up Settings, Boot Options, Boot Order
Security Setting or changing Passwords
Save & Exit Exiting with or without changing settings, Loading and restoring
Optimal or User defaults
Aptio Setup Utility - Copyright (C) 20XX Amreican Megatrends, Inc.
BIOS Information
Project Version NATCR X.XX
Build Date XX/XX/XXXX XX:XX:XX
Memory Information
Total Memory XXXX MB (DDR2)
Version X.XX.XXXX. Copyright (C) 20XX American Megatrends, Inc.
nanoX-TCR_BIOS_Main_a
Main Advanced Chipset Boot Security Save & Exit
[Setting Description]
: Select Screen
: Select Item
+/- : Change Opt.
F1 : General Help
Enter : Select
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC: Exit
System Date [Xxx XX/XX/20XX]
System Time
[XX:XX:XX]
System and Board Info