ADLINK nanoX-TCR - Manual (Page 43)

Chapter 4 BIOS Setup
nanoX-TCR Reference Manual 39
Boot BIOS Setup Screen
Figure 4-4. Boot BIOS Setup Screen
• Boot Configuration
♦ Quiet Boot [Disabled; Enabled]
♦ Fast Boot [Disabled; Enabled]
♦ Setup Prompt Timeout 1
♦ Bootup NumLock State [On; Off]
• Boot Option Priorities
♦ Boot Option #1 [P1-SILICONMOTION SM631GX8AB; UEFI: Hard Drive; Disabled]
♦ Boot Option #2 [P1-SILICONMOTION SM631GX8AB; UEFI: Hard Drive; Disabled]
♦ Hard Drive BBS Priorities
• Boot Option #1 [P1-SILICONMOTION SM631GX8AB; SDHC - SDC; Disabled]
• Boot Option #2 [P1-SILICONMOTION SM631GX8AB; SDHC - SDC; Disabled]
Aptio Setup Utility - Copyright (C) 20XX Amreican Megatrends, Inc.
Boot Configuration
Boot Option Priorities
Version X.XX.XXXX. Copyright (C) 20XX American Megatrends, Inc.
nanoX-TCR_BIOS_Boot_a
Main Advanced Chipset Boot Security Save & Exit
Quiet Boot [Disabled]
Fast Boot [Disabled]
Setup Prompt Timeout 1
Bootup NumLock State [On]
Boot Option #1 [P1SILICONMOTION S. . .]
Boot Option #2 [UEFI: Hard Drive]
Hard Drive BBS Priorities
[Setting Description]
: Select Screen
: Select Item
+/- : Change Opt.
F1 : General Help
Enter : Select
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC: Exit