ADLINK nanoX-TCR - Manual (Page 39)

Chapter 4 BIOS Setup
nanoX-TCR Reference Manual 35
• Trusted Computing
♦ TPM SUPPORT [Disabled; Enabled]
♦ Current TPM Status Information [no TPM on board]
• CPU Configuration
♦ Processor Type Genuine Intel(R) CPU
♦ EMT64 Supported
♦ Processor Speed XXXX MHz
♦ System Bus Speed XXX MHz
♦ Ratio Status XX
♦ Actual Ratio XX
♦ Processor Stepping XXXXX
♦ Microcode Revision XXX
♦ L1 Cache RAM XX k
♦ L1 Cache RAM XXX k
♦ Processor Core Single
♦ Hyper-Threading Supported
♦ Intel SpeedStep [Disabled; Enabled]
♦ Hyper-Threading [Disabled; Enabled]
♦ Execute Disable Bit [Disabled; Enabled]
♦ Limit CPUID Maximum [Disabled; Enabled]
♦ Intel Virtualization Technology [Disabled; Enabled]
♦ C-States [Disabled; Enabled]
• USB Configuration
♦ USB Devices:
1 Keyboard
• Legacy USB Support [Disabled; Enabled]
• EHCI Hand-off [Disabled; Enabled]
• H/W Monitor LM9163
♦ Pc Health Status
• System temperature : +XX C
• CPU temperature (By PECI) : +XX C
• Fan1 Speed : N/A
• Fan2 Speed : N/AXXXX RPM
• Fan3 Speed : N/A
• Fan4 Speed : N/A