ADLINK nanoX-BASE - Manual (Page 25)

Page 25 nanoX-BASE User’s Manual
CN7: Backlight Control
6.13 LVDS Panel Connectors
Pin Signal Pin Signal
1 LVDS_I2C_DAT 2 LVDS_I2C_CK
3 Panel_PWR 4 Panel_PWR
5 GND 6 LVDS_A0-
7 LVDS_A0+ 8 LVDS_VDD_EN
9 LVDS_A1- 10 LVDS_A1+
11 LVDS_BKLT_EN 12 LVDS_A2+
13 LVDS_A2- 14 NC
15 LVDS_A_CK- 16 LVDS_A_CK+
17 Panel_PWR 18 LVDS_A3+
19 LVDS_A3- 20 GND
21 NC 22 NC
23 GND 24 NC
25 NC 26 GND
27 NC 28 NC
29 GND 30 NC
31 NC 32 NC
33 NC 34 NC
CNY6: LVDS Flat Panel Connector
Pin Signal Pin Signal
1 GND 2 Panel PWR
3 Backlight CTRL 4 GND
5 Backlight Enable 6 GND
7 NC 8 Backlight PWR
1 2
To avoid damage to the display panel, be sure to set the Panel Power Voltage (JP3) and
Backlight Power Voltage (JP4) to the correct values for your display.
See 6.14 LVDS Jumper Settings for Panel Power Voltage (JP3), Backlight Power Voltage
(JP4) and other LVDS jumper settings.