ADLINK nanoX-BASE - Manual (Page 37)

Page 37 nanoX-BASE User’s Manual
8 Switches, LEDs & Power
8.1 Mini Switches (SW1~4)
There are two mini switches at the top left corner
of the board.
The SW1 switch is the ATX Power Button. This
switch can be used to power up and power down
the system with an ATX power supply.
The SW2 switch is the Reset Button.
SW1
SW2
At the top of the board below the SATA connectors
are two more switches.
The SW3 switch is the Sleep Button and the
SW4 switch is the Lid Button. Both buttons
support Type 10 modules for ACPI power
management behavior settings in an OS
environment.
SW3 SW4