ADLINK MXE-5300 Series - Manual (Page 20)

10 System Description
2.2.1 LED Indicators
In addition to the LED of the power switch, two LEDs on the front
panel indicate the following.
Table 2-2: LED Indicators
2.2.2 Power Switch
The power switch is non-latched, with a blue LED indicator. Sys-
tem is turned on when the button is depressed, and the power
LED lights. If the system hangs, depressing the switch for 5 sec-
onds turns the system off completely.
2.2.3 Reset Button
The reset button executes a hard reset.
2.2.4 PS/2 Connector
The MXE-5300 provides connectors for PS/2 keyboard and
mouse, either singly or with a Y-cable to connect both at the same
time.
LED indicator Color Description
Diagnostic Yellow
X
If lit continuously, indicates no
physical storage is connected
X
If blinking, indicates no mem-
ory is installed on either SO-
DIMM socket
HDD Green
When blinking, indicates the SATA hard
drive is active