3 esata connector 2.3.4 audio jacks, Table 2-7: active/link led table 2-8: speed led – ADLINK MXE-5300 Series User Manual

Page 27

Advertising
background image

System Description

17

MXE-5300

Table 2-7: Active/Link LED

Table 2-8: Speed LED

2.3.3

eSATA Connector

One eSATA port connector is located on the back panel, support-
ing external SATA storage expansion at data transfer rates up to
3.0Gb/s(300MB/s) / 1.5Gb/s(150MB/s).

The host SATA controller provides two modes of operation: a leg-
acy mode using I/O space, and an AHCI mode using memory
space. This connector supports only SATA singaling, and SATA
HDD or SSD requires connection to an external power supply for
operation.

2.3.4

Audio Jacks

The MXE-5300 implements Intel High Definition audio on a
Realtek ALC269 chip. The HD audio supports up to 24-bit, 192
KHz sample rate high quality headphone/speaker output and
microphone input. Access is provided by the pink jack for micro-
phone input and the green jack for output.

LED Color Status

Description

Yellow

OFF

Ethernet port is disconnected.

ON

Ethernet port is connected and no data
transmission.

Flashing

Ethernet port is connected and transmitting/
receiving data.

LED Color Status

Description

Green/
Orange

OFF

10 Mbps

Green

100 Mbps

Orange

1000 Mbps

Advertising