ADLINK MXE-5300 Series - Manual (Page 50)

40 Getting Started
4. Once final assembly as shown is complete, mount the
MXE-5300 series controller on the wall via the screw
holes.
3.7 Thermal Considerations
Heat-generating components of the MXE-5300 (such as CPU and
PCH) are all situated on the left side of the system. These compo-
nents directly contact the heat sink via thermal pads and dissipate
heat generated by the components. To maximize efficiency of heat
dissipation, a minimum of 2 inches (5 cm) clearance should be
maintained on the top of the chassis.