ADLINK MXE-1300 Series - Manual (Page 45)

Getting Started 33
MXE-1300
3. Rotate the CF cover to its original position and replace.
2.3 Connecting DI/O Device
The MXE-1300 series controller provides 4 digital input and 4 digi-
tal output ports. The two pluggable terminals provided enable con-
nection to the DI/O device.
Connect the two pluggable terminals to the DI/O connector on the
rear panel. Fix the pluggable terminal using the 2 screws.
For DI/O pin definitions, See “Digital I/O Connector” on page 15..