ADLINK MXE-1300 Series - Manual (Page 50)

38 Getting Started
4. Depress the MXE-1300 until a click is heard. The chas-
sis is now locked to the mounting bracket
2.6 Cooling Configuration
Heat-generating components of the MXE-1300 (such as CPU and
PCH) are all situated on the left side of the system. These compo-
nents directly contact the heat sink via thermal pads and dissipate
heat generated by the components. To maximize efficiency of heat
dissipation, maintain a minimum of 2 inches (5 cm) clearance on
the top of the MXE-1300.