ADLINK MXE-1300 Series - Manual (Page 51)

Driver Installation 39
MXE-1300
3 Driver Installation
After installing the operating system, all related drivers must be
installed for the system to function properly. This section describes
the drivers needed for Windows operating systems and the
procedures to install them. For other OS support, please contact
ADLINK for further information.
Install drivers as follows.
1. Fully install Microsoft Windows OS before installing any
drivers. Most standard I/O device drivers have been
included in Microsoft Windows OS. For Windows 7
users, please note that you need Administrator privilege
to install the drivers properly.
2. Install the chipset driver.
3. Install the graphics driver.
4. Install the Ethernet driver.
5. Install the audio driver.
6. Install the WDT (watchdog timer) driver.
7. Install the DI/O driver.
3.1 Installing the chipset driver
This section describes installation of the chipset driver for the
MXE-1300. The chipset driver directs the operating system to con-
figure the Intel
®
NM10 chipset components in order to ensure that
the following features function properly:
X
SATA Storage Support
X
USB Support
X Identification of Intel
®
Chipset Components in the Device
Manager
Microsoft Windows 7 must be fully installed and running on the
system before installing this software: