ADLINK NuPRO-E330 User Manual
Page 81
BIOS Setup
67
NuPRO-E330
Initial Graphics Adapter
Select which graphics controller to use as the primary boot
device. (“PCI” includes PCI slot and PCI Express x1/x4 slot,
and PCIe Mini Card. PCI will be first.)
X
IGD: Integrated graphics only.
X
PCI/IGD: Detect PCI graphics first, then integrated graph-
ics, then PCI Express x16 graphics.
X
PCI/PEG: Detect PCI graphics first, then PCI Express x16
graphics, then integrated graphics.
X
PEG/IGD: Detect PCI Express x16 graphics first, then inte-
grated graphics, then PCI.
X
PEG/PCI: Detect PCI Express x16 graphics first, then PCI
graphics, then integrated graphics.
IGD Graphics Mode Select
Selects the amount of system memory used by the integrated
graphics device.
PEG Port
This field allows you to select whether or not to use the PCI
Express x16 graphics card.
Disabled: Disables the PCI Express x16 graphics card.
Auto: The BIOS checks to see if a PCI Express x16 graphics
card is installed and the system boots up using the graphics
device in the order set in Initial Graphics Adapter.