ADLINK NuPRO-E330 - Manual (Page 82)

68 BIOS Setup
5.7.2 PCH Configuration
GbE LAN Boot
Invoke the onboard LAN’s PXE ROM to enable boot from LAN.
The options are Enabled and Disabled.
HDA Controller
Set this value to Enable/Disable the HD Audio Controller.
Restore on AC Power Loss
Determines which state the computer enters when AC power is
restored after a power loss. The options for this value are Last
State, Power On and Power Off.
X Power Off: Set this value to always power off the system
while AC power is restored.
X Power On: Set this value to always power on the system
while AC power is restored.
X Last State: Set this value to power off/on the system depend-
ing on the last system power state while AC power is restored.
PCIE Ports 0-3 Configuration
Sets the south bridge PCIe controller to one x4 slot or four x1 slots.