ADLINK CM1-86DX2 - Manual (Page 28)

22 Module Description
Backlight Header (X13)
Connector type: Hirose DF13 8-pin header
Adapter cable: n/a
*This voltage can be selected using the jumper "Backlight", shown on next table.
Table 3-3: Backlight Header Signals (X13)
Pin Signal Pin Signal
1 +12 V 2 +12 V
3 +5 V 4 +5 V
5 EN 6 VCC*
7 GND 8 GND
The maximum current on all supply pins is 1A.