ADLINK ReadyBoard 740 - Manual (Page 39)

BIOS Setup 27
RB-740
IDE Configuration
You can use this screen to select options for the IDE Configuration
Settings. Use the up and down < Arrow > keys to select an item.
Use the < + > and < - > keys to change the value of the selected
option. A description of the selected item appears on the right side
of the screen. The settings are described on the following pages.
An example of the IDE Configuration screen is shown below.
ATA/IDE Configuration
This item specifies whether the SATA channels are initialized in
Compatible or Enhanced mode of operation. The settings are
Disabled, Compatible and Enhanced (default: Compatible).
Configure SATA as
This item specifies whether the SATA channels support IDE or
AHCI operation. The settings are IDE and AHCI (default: IDE).
IDE Master/Slave
Select one of the hard disk drives to configure it. Press < Enter
> to access its sub menu.