Ahci configuration, Ahci port 0/1/2 – ADLINK ReadyBoard 740 User Manual
Page 43
Advertising
BIOS Setup
31
RB-740
AHCI Configuration
You can use this screen to select options for the AHCI Configura-
tion settings. Use the up and down < Arrow > keys to select an
item. Use the < + > and < - > keys to change the value of the
selected option. The settings are described on the following
pages. The screen is shown below.
AHCI Port 0/1/2
Displays the SATA drives installed on AHCI channels. Shows
“Not Detected” if no drive installed.
Advertising