ADLINK ReadyBoard 740 - Manual (Page 51)

BIOS Setup 39
RB-740
Add-On ROM Display Mode
Set this option to display add-on ROM (read-only memory)
messages. The default setting is Force BIOS. An example of
this is a SCSI BIOS or VGA BIOS.
Bootup Num-Lock
This option sets the Num Lock status when the system is pow-
ered on. Setting it to On will turn on the Num Lock key when
the system is booted up. Setting it to Off will not enable the
Num Lock key on bootup.
PS/2 Mouse Support
Set this value to allow the PS/2 mouse support to be adjusted.
The default setting is Enabled.
Wait for ‘F1’ If Error
Set this value to allow the Wait for ‘F1’ Error setting to be mod-
ified. The default setting is Enabled.
Hit ‘DEL’ Message Display
Set this value to allow the Hit “DEL” to enter Setup Message
Display to be modified. The default setting is Enabled.
Interrupt 19 Capture
Set this value to allow option ROMs such as network control-
lers to trap BIOS interrupt 19.