Dahua Technology LE-L - Manual (Page 62)

62
In
X346H346H346H
Figure 4-39, input mode value in the No. blank, and click pattern button.
4.9.7 Auto Scan Setup
In
X347H347H347H
Figure 4-38, click border button. The interface is shown as in
X348H348H348H
Figure 4-43.
Please go to
X349H349H349H
Figure 4-35, use direction arrows to select camera left limit
Then please go to
X350H350H350H
Figure 4-43
X
and click left limit button
Repeat the above procedures to set right limit.
Figure 4-43
4.9.8 Activate Auto Scan
In
X351H351H351H
Figure 4-39, click “Auto Scan” button, the system begins auto scan. Correspondingly, the auto
scan button becomes Stop button. Click stop button to terminate scan operation.
4.10 Flip
In
X352H352H352H
Figure 4-39, click page switch button, you can see an interface is shown as below. See Figure
44
X353H353H353H
. Here you can set auxiliary function. The aux value has relation ship with the Aux button of
the decoder.
Click page switch button again, system goes back to
X354H354H354H
Figure 4-32
X
.
Figure 4-44