Dahua Technology LE-L User Manual
Page 75
75
The interval value ranges from 0 to 3600 second. 0 means there is no interval. Once you input
interval here, when alarm (motion detection or abnormal event and etc) activates the email,
system will not send out the email immediately when an alarm occurred, system just sends out
the email regularly according to the interval you set here. This function is very useful when there
is a lot of alarms to be processed which may result in the mail server overload.
Figure 5-21
5.3.6 Alarm
Please refer to chapter 4.6 Alarm Setup and Activation.
5.3.7 Detect
Please refer to chapter 4.5 Detect.
5.3.8 Pan/Tilt/Zoom
The pan/tilt/zoom setup includes the following items. Please select channel first. See
X376H376H376H
Figure 5-
22..
z
Protocol: Select corresponding PTZ protocol such as PELCOD.
z
Address: input corresponding PTZ address.
z
Baud rate: Select baud rate.
z
Data bit: Select data bit.
z
Stop bit: Select stop bit.
z
Parity: There are three choices: none/odd/even.
After completed all the setups please click save button, system goes back to the previous menu.
For detailed setup, please refer to chapter 4.9 preset/patrol/pattern/scan.