Dahua Technology LE-L User Manual
Page 76
76
Figure 5-22
5.3.9 Display
Display setup interface is shown as below. See
X377H377H377H
Figure 5-23.
z
Transparency: Here is for you to adjust transparency. The value ranges from 128 to 255.
z
Channel name: Here is for you to modify channel name. System max support 25-digit (The
value may vary due to different series). Please note all your modification here only applies to
DVR local end. You need to open web or client end to refresh channel name.
z
Time display: You can select to display time or not when system is playback.
z
Channel display: You can select to channel name or not when system is playback.
z
Overlay information: System displays some information in the screen for your reference.
z
Resolution: There are four options: 1280×1024(default),1280Ч720,1024Ч768,800Ч600.
z
Display mode: you can select from the dropdown list: self-adaptive/VGA/TV.
z
Enable tour: activate tour function.
z
Interval: System supports 1/4/9/16-window tour. Input proper interval value here. The value
ranges from 5-120 seconds. In tour process, you can use mouse or click Shift to turn on
window switch function.
Stands for opening switch function,
stands for closing switch
function.
z
Monitor tour type: System support 1-window tour.
z
Alarm tour type: System support 1-window tour.
Please highlight icon
to select the corresponding function.
After completing all the setups please click save button, system goes back to the previous menu.