Display Devices PJE Outdoor Projector Enclosures - Manual (Page 5)

Custom Projector Enclosure
8/15/2005
Hanging the Enclosure
1. Use the two Unistrut channels on the top of the enclosure to attach to your structural
ceiling/truss. We recommend ½” strut hardware. You may attach rated C-Clamps or
Cheesboroughs to these structural channels.
2. Raise the unit with an equipment lift (or lower truss to enclosure).
3. Tighten all hardware.
4. Bring cabling through the holes on the side of the enclosure – secure both power and signal
cables with strain relief.
Structural
mounting
channel Structural
mounting
channel