Dream Property DM8000 HD PVR - Manual (Page 20)

-20-
Finalizing the basic setup
3.6 Network
The network wizard will assist you with the network setup of your
Dreambox.
Press the OK-Button on your remote control to get to start the
configuration.
Choose between integrated wireless and integrated Ethernet using
the
Navigation-Buttons up/down and press the OK-Button to
select.
Usually the standard setting (Use DHCP) should work if you have
connected your Dreambox to a internet router. The DHCP-Server
needed for this setting is most of the time activated by default on
a router.
For further information please refer to chaper 11.6 Network.
Press the OK-Button on your remote control to get to activate the
network device.