Dream Property DM8000 HD PVR - Manual (Page 53)

-53-
If this function is enabled (standard) the signal from the VCR Scart is directly passed to the TV.
Depending on the model the this is either enabled when you turn on the device or when you start a replay.
Press the green Options-Button to save the setting or the red Options-Button to discard them.
You are taken back to the “System“ menu.
11.5 OLED-Display
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option “Setup” and press the OK-Button to select.
1. Navigate to the option “System” and press the OK-Button.
• The “System” menu will open up.
2. Navigate to the option “Display setup…” and press the OK-Button.
Using the Navigation-Buttons left and right you can set the bright-
ness of the OLED-display.
“Standby” sets the brightness value for standby.
All changes will take effect immediately. Press the green Options-
Button to save the setting or the red Options-Button to discard
them. You are taken back to the “System“ menu.
11.6 Network
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option “Setup” and press the OK-Button to select.
1. Navigate to the option “System” and press the OK-Button.
• The “System” menu will open up.
2. Navigate to the option “Network…” and press the OK-Button.