Technical data, 1 programming the remote control – Dream Property DM8000 HD PVR User Manual

Page 82

Advertising
background image

-82-

18. Technical data

• 400 MHz MIPS Prozessor
• Linux operating system
• 4x DVB Common-Interface Slot
• 2 x Smartcard-Reader (Dreamcrypt)
• DVI out
• YPbPr component out
• Composite out
• S-Video out
• 2 x Scart-Connector (TV, VCR)
• S/P-DIF optical and coaxial out AC-3
• integrated Compact Flash Reader (Slot inside
the front panel)
• integrated SD-Card Reader (Slot inside the front
panel)
• MPEG2 / H.264 hardware decoding (DVB
compliant)
• Twin DVB-S2 Tuner

17.1 Programming the remote control

• Press the TV-Mode-Button once.

• Press the SHIFT/Setup-Button for 3 seconds, the TV-Mode-Button will flash twice.

• Use the Numeric-Keypad to enter the four digit device code into the remote control.
The TV-Mode-Button will flash once for every digit you enter. Once you have entered all
four digit the TV-Mode-Button will flash twice.

• The remote control exits the programming mode automatically.

• If no code is entered within 10 seconds the remote control will exit the programming
mode automatically.

• 2 x Plug&Play Tuner slots for optional
tuners DVB-C, DVB-T, DVB-S, mixable
• 10/100 Mbit compatible Ethernet Interface
• 3 x USB 2.0 Port (1x front, 2x back)
• serial V.24/RS232 port
• brilliant OLED-Display
• 256 MByte DDR RAM
• 128 MByte Flash
• 2x SATA
• mini PCI slot
• Picture-in-Picture mode (PiP)
• prepared for WiFi (slot and antenna)
• EPG-support (electronic program guide)
• Built-in Teletext
• Support for DiSEqC

TM

1.0/1.1/1.2 and USALS

• OSD in many languages

Additional info:

DVB/S2-Tuner:

supports DVB-S2 Broadcast Services profile
Frequency Range: 950 - 2150 MHz
QPSK Demodulation according to EN 302 307
Inputlevel: -65 dBm ... -25 dBm
Noise extent: 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance: 75 Ohm
AFC-Catchlevel: +/- 3MHz
Demodulation Shaped QPSK and 8PSK
FEC Viterbi and Reed-Solomon

Advertising