Dream Property DM8000 HD PVR - Manual (Page 9)

-9-
3. Volatge selector 230V/110V
Using this switch the Dreambox can be used in countries with 110V mains power, as in the USA for exam-
ple. Move the switch to the 110V position to acieve this.
!!! WARNING !!! Check that the switch is in the right position before switching on your Dreambox. Otherwise
irreversible damages might result.
4. Analog audio out (RCA)
Connect your Dreambox with a RCA/Cinch cable to your HiFi-Amplifier (e.g. AUX In or Tape In ports).
5. Video out (Composite)
You can optionally connect your Dreambox to a TV using a RCA/Chinch cable.
6. YPbPr out
Connect your Dreamboxes’ YPbPr out to a device with a YPbPr in, like a Beamer for example.
7. TV Scart
Connect your TV, projector or beamer to your Dreambox using a Scart cable.
8. VCR Scart
Connect your VCR or DVD player to your Dreambox using a Scart cable. Remember, the VCR Scart is not
designed to record a video signal from the VCR or DVD player. The signal of the connected device is looped
through to the TV-Scart connector, incase you have selected VCR Scart in the main menu. Note: You cannot
record any signals onto your Dreambox using this connector.
9. DVI out
You can connect a TV to the DVI out of your Dreambox if your TV has the right input.
10. Digital audio out digital (Toslink)
You can connect your Dreambox with an optical (Toslink) cable to your HiFi-Amplifier or DSP. The AC3 signal
is also available at this port in case the selected channel transmits Dolby Digital signals.
11. Coaxial audio out digital
You can connect your Dreambox with an coaxial cable to your HiFi-Amplifier or DSP. The AC3 signal is also
available at this port in case the selected channel transmits Dolby Digital signals.
12. Serial port (RS232C, Sub-D, 9-pol.)
The Serial Port is used as a service port to update the operating system. Please connect a serial null modem
cable here.
13. S-Video out
Connect your Dreamboxes’ S-Video out to a device with a S-Video in, like a Beamer for example.
14. CI-Slots
Plug in here any CI- Module of your choice.
15. Network interface (Ethernet 10/100Mbit, RJ45)
The Communication Port is an Ethernet port. It is used to communicate with your Dreambox via HTTP, FTP,
NFS, Telnet, SSH and Samba to access your recorded movies, to upload channel lists, etc. This port is also
used to update the operating system of your Dreambox. Please use a regular patch cable to connect your
Dreambox to your LAN.