Dream Property DM8000 HD PVR - Manual (Page 63)

-63-
Navigate to the option “Use usals for this sat” and change the set-
ting to “no” using the
Navigation-Buttons left and right .
Navigate to the option “Stored position“ and enter position of the
selected satellite which is saved in the positioner by using the
Numeric Keypad .
Refer to the instruction manual or your positioner for the number
of the saved position.
12.1.7 Tuner B setup (DVB-S/DVB-S2)
The same setup possibilities that applied for Tuner A also apply for Tuner B. There are some additional con-
figuration options.
Equal to socket A:
Use this setting if Tuner B should use the same settings as Tuner A.
Loopthrough to socket A:
Use this option if the LNB1 out should be connected to the LNB2 in. You do not need an external connection
cable.
Nothing connected:
Use this option if no cable is attached to Tuner B.
Secondary cable from motorized LNB:
Use this option if you are using a positioner with a Twin- or Quad LNB and have 2 cables from the LNB con-
nected to the LNB1 and LNB2 in. Tuner A controls the positioner and using Tuner B you can continue watch-
ing TV on the same satellite while recording. All others are grayed out.