Dream Property DM7025 + - Manual (Page 73)

- 73 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5 / D M 7 0 2 5 +
11.7 Network
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select
.
1. Navigate to the option “System” and press the OK-Button.
¾ The “System” menu will open up.
2. Navigate to the option “Network…” and press the OK-Button.
3. Navigate to the option “Device setup…” and press the OK-Button.
4. Navigate to the option “eth0” and press the OK-Button.
If you are using a DHCP server in your LAN, configure the DHCP server so it does not assign
the IP address used by the Dreambox. Otherwise an IP address collision is possible. Refer to
the DHCP server’s manual about how to configure a DHCP address pool.