Dream Property DM7025 + - Manual (Page 88)

- 88 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5 / D M 7 0 2 5 +
12.4 Automatic scan
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select
.
1. Navigate to the option “Service searching” and press the OK-Button.
¾ The “Service searching” menu will open up.
2. Navigate to the option “Automatic scan” and press the OK-Button.
¾ The “Automatic scan” menu will open up.
3. Use the Navigation-Buttons up and down to select the DVB-T Tuner and press the OK-Button.
Set the “Clear before scan” option to “Yes” if you
want to delete all services before the scan starts.
Otherwise leave the setting to “No” which results in
only new services being added to the channel list. To
find the new services press the Navigation-Buttons
up/down and afterwards the green Options-Button to
access the “Satellites” view. You will find them under
“New”.
Use the Navigation-Buttons up/down to select a
tuner and the Navigation-Buttons left/right to
enable or disable the scan for the selected tuner.
Press the OK-Button to start the scan for all tuners
which option is set to “Yes”.
Note:
The search will only be run once if you are using two tuners of the same type (DVB-S,
2xDVB-T or 2x DVB-C) since the service list is the same for both of them. It is not necessary
to run the search separately for each tuner.