Dream Property DM7025 + - Manual (Page 99)

- 99 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5 / D M 7 0 2 5 +
16. TV-Mode setup
A four digit device code is selected from the device list and entered into the remote control.
The most recent device list can be found in the download center on our website.
16.1 Programming the remote control
- Press
the TV-Mode-Button once.
- Press
the SHIFT/Setup-Button for 3 seconds,
the TV-Mode-Button will flash twice.
- Use
the Numeric-Keypad to enter the four digit device code into the remote control.
The TV-Mode-Button will flash once for every digit you enter. Once you have entered all
four digit the TV-Mode-Button will flash twice.
- The remote control exits the programming mode automatically.
- If no code is entered within 10 seconds the remote control will exit the programming
mode automatically.
SHIFT / SETUP-Button
TV-Mode-Button
Numeric-Keypad