Dream Property DM7025 + - Manual (Page 83)

- 83 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5 / D M 7 0 2 5 +
12.1.6 Stab Positioner without USALS (DVB-S)
Use this type of configuration if you want to receive many satellites without a Stab positioner
from a Single Universal LNB. The coax cable is directly connected from you Dreambox to the
LNB.
Please read the section 12.1 DVB-S configuration to learn how to get into this menu.
The “Satconfig” menu will open up.
Using the Navigations-Buttons left/right to select
the “advanced” configuration.
Navigate to the option “Satellite”. Use to the
Navigation-Buttons left and right to select the
desired satellite and.
Navigate to the option “Satellite” and press the
Navigation-Button right.
Use the up/down-Buttons to navigate to the
“DiSEqC-Mode” option and use the left/right-
Buttons to select “1.2“.
Navigate to the option “Use usals for this sat” and
change the setting to “no” using the Navigation-
Buttons left and right.
Navigate to the option “Stored position“ and enter
position of the selected satellite which is saved in the
positioner by using the Numeric Keypad.
Refer to the instruction manual or your positioner for
the number of the saved position.