Dream Property DM7025 + - Manual (Page 75)

- 75 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5 / D M 7 0 2 5 +
11.8 Common Interface
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select
.
1. Navigate to the option “Common Interface” and press the OK-Button.
¾ The “Common Interface” menu will open up.
Reset:
This options resets your CI-Module. This function is needed if you are experiencing trouble with one of
your encrypted services.
Init:
This option initializes an inserted Smartcard. It is recommended to inset the CI-Module with the
Smartcard already in it.
No module found:
No CI-Module is inserted into the slot. If you have inserted one the name and firmware version will
show.
Navigate to this option and press the OK-Button to get to the extended options of the inserted CI-
Module. The option strongly depend on the type of module inserted and therefore will not be explained
in detail.
Can decrypt multiple services:
You can set if your CI-Module can decrypt multiple services or not. Please note that not every CI-
Module supports this feature. Check the instruction manual of your CI-Module for information about
this feature.
The “Auto” option only works with so called Alphacrypt Modules.
The Exit-Button will quit this menu.