Dream Property DM7020 HD - Manual (Page 49)

The status of a timer is shown on the right side:
waiting means: still coming up
recording means: recording right now
done means: recording finished
the red X indicates that a timer was deactivated
If you pressed the blue Options-Button you will be asked if you really want to delete the finished timer.
Use the Navigation-Buttons (
) to select. Press the OK-Button to activate.
Your Dreambox will be turned on 5 minutes before the recording if a recording is supposed to start
while the Dreambox is in Deep-Standby mode.
5.3.4 Timeshift
Press the PLAY/PAUSE-Button to pause the screen (video and audio will pause). The recording will
continue in the background. You can fast-forward and rewind while recording as long as you have already
recorded at least 1 minute long.
Press the PLAY/PAUSE-Button again to resume watching. This way you won’t have to miss anything ever
again if you quickly have to catch a phone call.
The Timeshift-Mode can be exited by pressing the Stop-Button.
To ensure the Timeshift-Mode is not stopped by accident you will be asked if you want to quit the Timeshift-
Mode.
Use the Navigation-Buttons ( ) to select. Press the OK-Button to activate.
5.4 Watch a recording (Playback)
1. Press the PVR-Button to get to the selection of recordings.
2. Use the Navigation-Buttons ( ) to select a recording. Press the OK-Button to start playing it.
During replay you can see the control symbols in the Infobar. Press the Navigation-Buttons ( ) or
press the PVR-Button, to get back to the list of recordings.
If you have previously watched the movie you will be asked to continue where you left off when you start
watching it the next time. If you do not make a selection within 10 seconds the window will disappear and
the movie starts from the beginning.
In PVR-Mode the Options-Buttons are mapped as described below:
Rewind-Button
= Rewind
PLAY/PAUSE-Button
= Pause and Play
STOPP-Button
= Stop
44