Dream Property DM7020 HD - Manual (Page 72)

4. With the Navigation-Buttons ( ) choose the option “Automatic scan” and press the OK-Button.
5. Set all tuners with which you want to search to “yes”. Use the Navigation-Buttons ( ) choose
the tuner and the Navigation-Buttons ( ) to switch to “yes”.
6. Press the OK-Button to start the scan.
Automatic scan
Use the Navigation-Buttons ( ) to set the “Clear before scan” option to “Yes” if you want to delete
all services before the scan starts. Otherwise leave the setting to “No” which results in only new services
being added to the channel list. In order to find the new services, follow this steps:
1. Press the Navigation-Buttons ( ) to open the channellist.
2. Press the green Options-Button to access the “Satellites” view.
3. With the Navigation-Buttons ( ) choose the option “New” and press the OK-Button.
Now you see all new services, which were added by the scan.
The search will only be run once if you are using two tuners of the same type (2x DVB-S/S2, 2x
DVB-T or 2x DVB-C) since the service list is the same for both of them. It is not necessary to
run the search separately for each tuner.
67