Dream Property DM7020 HD - Manual (Page 61)

Reset This options resets your CI-Module. This function is needed if you are experiencing trouble with one
of your encrypted services.
Init This option initializes an inserted Smartcard. It is recommended to inset the CI-Module with the
Smartcard already in it.
No module found No CI-Module is inserted into the slot. If you have inserted one the name and firmware
version will show. Navigate to this option and press the OK-Button to get to the extended options
of the inserted CIModule. The option strongly depend on the type of module inserted and therefore
will not be explained in detail. Refer to the user‘s manual of you CI-Module for additional information
on this topic.
Can decrypt multiple services You can set if your CI-Module can decrypt multiple services or not. Please
note that not every CI Module supports this feature. Check the instruction manual of your CI-Module
for information about this feature. The “Auto” option only works with so called Alphacrypt Modules.
The Exit-Button will quit this menu.
High bitrate support You can set if your CI-Module can process high bitrates (30.000). Please note that
not every CI Module supports this feature. Check the instruction manual of your CI-Module for
information about this feature.
6.8 Skin
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons ( ) choose the option “System” and press the OK-Button.
4. With the Navigation-Buttons ( ) choose the option “Skin” and press the OK-Button.
Skin Selection
The name of the default skin is “Default Skin”.
With the Navigation-Buttons ( ) choose your desired skin and press the OK-Button.
To fully activate the skin the system needs to be restarted. Use the Navigation-Buttons ( ) to select
your desired option and press the OK-Button.
56