Dream Property DM7020 HD - Manual (Page 54)

Infobar timeout: Set the desired time after which you want the Infobar to disappear. You can choose
between one and ten seconds or “no timeout”.
6.2.2 Intermediate mode:
These settings supplement the settings in simple mode.
Recordings always have priority: If this option is set to “Yes” your Dreambox will automatically switch
to the service which is supposed to be recorded incase there is a conflict with an existing timer. If you
set this option to “No” you will be asked if you want to switch to the service which is supposed to
be recorded.
Show positioner movement: If you own a satellite dish with a positioner you can see a flashing symbol of
a satellite dish on your screen if you set this option to “yes”.
Enable multi bouquets: Set this option to “Yes” if you want to use multiple bouquets.
Change bouquets in quickzap: If this option is set to “Yes” you will automatically be taken to the next
bouquet while changing channels once you have reached the end of one bouquet.
Alternative radio mode: Set this option to “Yes” if you want the handling in the Radio mode to be the
same as in the TV mode.
Action on long powerbutton press: Set your desired option what is supposed to happen if you push the
Standby-Button for a few seconds. The possible options are “show shutdown menu” and “imme-
diate shutdown”
.
Action on short powerbutton press: Set your desired option what is supposed to happen if you push the
Standby-Button shortly. The possible options are “show shutdown menu”, “immediate shut-
down”
and “standby”.
6.3 Timezone
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons ( ) choose the option “System” and press the OK-Button.
4. With the Navigation-Buttons ( ) choose the option “Timezone” and press the OK-Button.
5. With the Navigation-Buttons ( ) choose your timezone and press the OK-Button. Alternatively
press the green Options-Button to save the setting or the red Options-Button to discard them.
6.4 A/V Settings
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons ( ) choose the option “System” and press the OK-Button.
4. With the Navigation-Buttons ( ) choose the option “A/V Settings” and press the OK-Button.
49