Dream Property DM600 PVR - Manual (Page 16)

16
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR
english
Enter a service number to directly access the option by using the Numeric Keypad. The
service numbers are on the left side of the service list.
The Numeric Keypad can also be used to enter the teletext page number when you are in
TV-Control-Mode and if your TV is teletext capable. The TV station has to submit teletext
information; otherwise this feature cannot be used.
The Arrow-Left and Arrow-Right-Button enable you to jump back and forth between the
last 20 channels you have watched.
Pressing the MUTE-Button mutes the Volume. A crossed speaker symbol will appear on the
TV screen. Pressing it again or pressing one of the Volume +/- Buttons brings back the
audio.
You can leave all menus and service lists by pressing the EXIT-Button.
If no OSD menu is visible on the screen and you are in TV or RADIO-Mode, pressing the
INFO-Button will reveal the EPG information of the chose channel if it is available.
By pressing the OK-Button you confirm a selection in the menu or service list navigation.
If no OSD menu is present on your screen, the infobar is shown once you press the OK-
Button.
In general the menus are controlled using the Navigation-Buttons on your remote control.
To get into a submenu you have to press the OK-Button.
Numeric-Keypad
Arrow-Left-Button Arrow-Right-Button
Mute-Button
EXIT-Button
INFO-Button
OK-Button
Navigation-Buttons