Dream Property DM600 PVR - Manual (Page 18)

18
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR
english
2. Installation
2.1
Turning the device on
- Insert 2 AA (1,5V) batteries, taking care to observe the + and - markings indicated
inside, into the remote control.
-
Before using the Dreambox, please read the safety instructions.
-
Connect the LNB or antenna with a coaxial cable to LNB or Antenna In at your
Dreambox.
-
Connect the Dreambox with a Scart cable to your television screen.
-
Plug in the power cable into a 230V/50Hz power socket.
-
If you are using a switchable power socket please shutdown your Dreambox into
deep standby before switching off the power socket.
-
If you switch on your Dreambox for the first time, you will see the setup wizard.
The setup wizard will guide you through the first time installation. You will be asked
for your TV standard, the regional settings and your language. Please choose and
follow the instructions on the screen.
-
Please note that the video format meets the factory setting CVBS (FBAS).